[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.21-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #911 SMP Thu Sep 15 14:22:38 BST 2016
[    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
[    0.000000] cma: Reserved 8 MiB at 0x3a800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 241664
[    0.000000] free_area_init_node: node 0, pgdat 808c2f40, node_mem_map b9fa6000
[    0.000000]   Normal zone: 2124 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 241664 pages, LIFO batch:31
[    0.000000] [bcm2709_smp_init_cpus] enter (9520->f3003010)
[    0.000000] [bcm2709_smp_init_cpus] ncores=4
[    0.000000] PERCPU: Embedded 13 pages/cpu @b9f62000 s22592 r8192 d22464 u53248
[    0.000000] pcpu-alloc: s22592 r8192 d22464 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 239540
[    0.000000] Kernel command line: 8250.nr_uarts=0 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2709.boardrev=0xa02082 bcm2709.serial=0x78dc82f0 smsc95xx.macaddr=B8:27:EB:DC:82:F0 bcm2708_fb.fbswap=1 bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 939072K/966656K available (6348K kernel code, 432K rwdata, 1716K rodata, 476K init, 764K bss, 19392K reserved, 8192K cma-reserved)
[    0.000000] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xbb800000 - 0xff800000   (1088 MB)
    lowmem  : 0x80000000 - 0xbb000000   ( 944 MB)
    modules : 0x7f000000 - 0x80000000   (  16 MB)
      .text : 0x80008000 - 0x807e854c   (8066 kB)
      .init : 0x807e9000 - 0x80860000   ( 476 kB)
      .data : 0x80860000 - 0x808cc250   ( 433 kB)
       .bss : 0x808cf000 - 0x8098e1ec   ( 765 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000025] Switching to timer-based delay loop, resolution 52ns
[    0.000281] Console: colour dummy device 80x30
[    0.000480] console [tty1] enabled
[    0.000504] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000525] pid_max: default: 32768 minimum: 301
[    0.000839] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000854] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001779] Disabling cpuset control group subsystem
[    0.001811] Initializing cgroup subsys io
[    0.001839] Initializing cgroup subsys memory
[    0.001882] Initializing cgroup subsys devices
[    0.001902] Initializing cgroup subsys freezer
[    0.001921] Initializing cgroup subsys net_cls
[    0.001969] CPU: Testing write buffer coherency: ok
[    0.002030] ftrace: allocating 21220 entries in 63 pages
[    0.051218] CPU0: update cpu_capacity 1024
[    0.051251] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.051264] [bcm2709_smp_prepare_cpus] enter
[    0.051403] Setting up static identity map for 0x8240 - 0x8274
[    0.053029] [bcm2709_boot_secondary] cpu:1 started (0) 18
[    0.053245] [bcm2709_secondary_init] enter cpu:1
[    0.053287] CPU1: update cpu_capacity 1024
[    0.053293] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.053663] [bcm2709_boot_secondary] cpu:2 started (0) 17
[    0.053826] [bcm2709_secondary_init] enter cpu:2
[    0.053847] CPU2: update cpu_capacity 1024
[    0.053853] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.054207] [bcm2709_boot_secondary] cpu:3 started (0) 17
[    0.054337] [bcm2709_secondary_init] enter cpu:3
[    0.054357] CPU3: update cpu_capacity 1024
[    0.054363] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.054423] Brought up 4 CPUs
[    0.054445] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.054454] CPU: All CPU(s) started in HYP mode.
[    0.054461] CPU: Virtualization extensions available.
[    0.055077] devtmpfs: initialized
[    0.066194] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[    0.066522] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.067257] pinctrl core: initialized pinctrl subsystem
[    0.067768] NET: Registered protocol family 16
[    0.073021] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.079978] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.079989] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.080142] Serial: AMBA PL011 UART driver
[    0.080274] uart-pl011 3f201000.uart: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[    0.080433] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.143355] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x1
[    0.143914] SCSI subsystem initialized
[    0.144103] usbcore: registered new interface driver usbfs
[    0.144193] usbcore: registered new interface driver hub
[    0.144291] usbcore: registered new device driver usb
[    0.150776] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-09-21 13:13
[    0.177988] clocksource: Switched to clocksource arch_sys_counter
[    0.222666] FS-Cache: Loaded
[    0.222932] CacheFiles: Loaded
[    0.235161] NET: Registered protocol family 2
[    0.236016] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.236130] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.236319] TCP: Hash tables configured (established 8192 bind 8192)
[    0.236412] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.236458] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.236684] NET: Registered protocol family 1
[    0.236997] RPC: Registered named UNIX socket transport module.
[    0.237007] RPC: Registered udp transport module.
[    0.237015] RPC: Registered tcp transport module.
[    0.237024] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.238197] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[    0.239496] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.252689] VFS: Disk quotas dquot_6.6.0
[    0.253001] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.255228] FS-Cache: Netfs 'nfs' registered for caching
[    0.256123] NFS: Registering the id_resolver key type
[    0.256171] Key type id_resolver registered
[    0.256180] Key type id_legacy registered
[    0.258506] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.258644] io scheduler noop registered
[    0.258665] io scheduler deadline registered (default)
[    0.258718] io scheduler cfq registered
[    0.261215] BCM2708FB: allocated DMA memory fac00000
[    0.261241] BCM2708FB: allocated DMA channel 0 @ f3007000
[    0.311484] Console: switching to colour frame buffer device 228x61
[    1.157695] bcm2835-rng 3f104000.rng: hwrng registered
[    1.157884] vc-cma: Videocore CMA driver
[    1.157895] vc-cma: vc_cma_base      = 0x00000000
[    1.157904] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
[    1.157913] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
[    1.158196] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
[    1.172907] brd: module loaded
[    1.181555] loop: module loaded
[    1.182533] vchiq: vchiq_init_state: slot_zero = 0xbac80000, is_master = 0
[    1.184080] Loading iSCSI transport class v2.0-870.
[    1.184737] usbcore: registered new interface driver smsc95xx
[    1.184791] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.385053] Core Release: 2.80a
[    1.385070] Setting default values for core params
[    1.385107] Finished setting default values for core params
[    1.585475] Using Buffer DMA mode
[    1.585486] Periodic Transfer Interrupt Enhancement - disabled
[    1.585494] Multiprocessor Interrupt Enhancement - disabled
[    1.585504] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.585519] Dedicated Tx FIFOs mode
[    1.585823] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xbac14000 dma = 0xfac14000 len=9024
[    1.585854] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[    1.585878] dwc_otg: Microframe scheduler enabled
[    1.585930] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x80447364
[    1.585947] WARN::hcd_init_fiq:414: FIQ ASM at 0x804476d4 length 36
[    1.585961] WARN::hcd_init_fiq:439: MPHI regs_base at 0xbbf7a000
[    1.586029] dwc_otg 3f980000.usb: DWC OTG Controller
[    1.586067] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    1.586103] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[    1.586155] Init: Port Power? op_state=1
[    1.586163] Init: Power Port (0)
[    1.586373] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.586388] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.586400] usb usb1: Product: DWC OTG Controller
[    1.586412] usb usb1: Manufacturer: Linux 4.4.21-v7+ dwc_otg_hcd
[    1.586424] usb usb1: SerialNumber: 3f980000.usb
[    1.587242] hub 1-0:1.0: USB hub found
[    1.587284] hub 1-0:1.0: 1 port detected
[    1.587883] dwc_otg: FIQ enabled
[    1.587892] dwc_otg: NAK holdoff enabled
[    1.587901] dwc_otg: FIQ split-transaction FSM enabled
[    1.587939] Module dwc_common_port init
[    1.588231] usbcore: registered new interface driver usb-storage
[    1.588513] mousedev: PS/2 mouse device common for all mice
[    1.589261] bcm2835-cpufreq: min=600000 max=1200000
[    1.589860] sdhci: Secure Digital Host Controller Interface driver
[    1.589868] sdhci: Copyright(c) Pierre Ossman
[    1.590181] sdhost: log_buf @ bac13000 (fac13000)
[    1.648019] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    1.650300] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[    1.650313] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[    1.705200] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.707161] mmc0: new high speed SDHC card at address 0007
[    1.707697] mmcblk0: mmc0:0007 SL16G 14.5 GiB
[    1.708102] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.708561] ledtrig-cpu: registered to indicate activity on CPUs
[    1.708683] hidraw: raw HID events driver (C) Jiri Kosina
[    1.708882] usbcore: registered new interface driver usbhid
[    1.708891] usbhid: USB HID core driver
[    1.709205]  mmcblk0: p1 p2
[    1.709425] Initializing XFRM netlink socket
[    1.709464] NET: Registered protocol family 17
[    1.709631] Key type dns_resolver registered
[    1.710239] Registering SWP/SWPB emulation handler
[    1.711050] registered taskstats version 1
[    1.711250] vc-sm: Videocore shared memory driver
[    1.711265] [vc_sm_connected_init]: start
[    1.711994] [vc_sm_connected_init]: end - returning 0
[    1.714376] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[    1.714775] of_cfs_init
[    1.714857] of_cfs_init: OK
[    1.727289] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    1.728923] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.730478] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.732689] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    1.732739] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    1.733250] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    1.742660] devtmpfs: mounted
[    1.743452] Freeing unused kernel memory: 476K (807e9000 - 80860000)
[    1.778116] Indeed it is in host mode hprt0 = 00021501
[    1.823775] mmc1: new high speed SDIO card at address 0001
[    1.958037] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    1.958180] Indeed it is in host mode hprt0 = 00001101
[    2.096964] random: systemd: uninitialized urandom read (16 bytes read, 34 bits of entropy available)
[    2.100882] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    2.101237] systemd[1]: Detected architecture 'arm'.
[    2.158302] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[    2.158324] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.159132] hub 1-1:1.0: USB hub found
[    2.159234] hub 1-1:1.0: 5 ports detected
[    2.220409] NET: Registered protocol family 10
[    2.221865] systemd[1]: Inserted module 'ipv6'
[    2.223626] systemd[1]: Set hostname to <raspberrypi>.
[    2.369962] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 69 bits of entropy available)
[    2.438075] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    2.459644] random: systemd: uninitialized urandom read (16 bytes read, 71 bits of entropy available)
[    2.460954] random: systemd: uninitialized urandom read (16 bytes read, 71 bits of entropy available)
[    2.462428] random: systemd: uninitialized urandom read (16 bytes read, 71 bits of entropy available)
[    2.478201] random: systemd: uninitialized urandom read (16 bytes read, 71 bits of entropy available)
[    2.478954] random: systemd: uninitialized urandom read (16 bytes read, 71 bits of entropy available)
[    2.479125] random: systemd: uninitialized urandom read (16 bytes read, 71 bits of entropy available)
[    2.514514] random: systemd: uninitialized urandom read (16 bytes read, 71 bits of entropy available)
[    2.517393] random: systemd: uninitialized urandom read (16 bytes read, 71 bits of entropy available)
[    2.538380] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    2.538404] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.541322] smsc95xx v1.0.4
[    2.601876] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:dc:82:f0
[    2.635132] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    2.635550] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.635632] systemd[1]: Starting Remote File Systems (Pre).
[    2.635786] systemd[1]: Reached target Remote File Systems (Pre).
[    2.635933] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    2.636402] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.636485] systemd[1]: Starting Encrypted Volumes.
[    2.636555] systemd[1]: Reached target Encrypted Volumes.
[    2.636642] systemd[1]: Starting Swap.
[    2.636709] systemd[1]: Reached target Swap.
[    2.636782] systemd[1]: Expecting device dev-mmcblk0p1.device...
[    2.636853] systemd[1]: Starting Root Slice.
[    2.637001] systemd[1]: Created slice Root Slice.
[    2.637071] systemd[1]: Starting User and Session Slice.
[    2.637303] systemd[1]: Created slice User and Session Slice.
[    2.637376] systemd[1]: Starting Delayed Shutdown Socket.
[    2.637544] systemd[1]: Listening on Delayed Shutdown Socket.
[    2.637616] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    2.637808] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    2.637878] systemd[1]: Starting Journal Socket (/dev/log).
[    2.638306] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.638401] systemd[1]: Starting udev Control Socket.
[    2.638554] systemd[1]: Listening on udev Control Socket.
[    2.638642] systemd[1]: Starting udev Kernel Socket.
[    2.638767] systemd[1]: Listening on udev Kernel Socket.
[    2.638860] systemd[1]: Starting Journal Socket.
[    2.639046] systemd[1]: Listening on Journal Socket.
[    2.639183] systemd[1]: Starting System Slice.
[    2.639402] systemd[1]: Created slice System Slice.
[    2.639516] systemd[1]: Starting File System Check on Root Device...
[    2.668639] systemd[1]: Starting system-systemd\x2dfsck.slice.
[    2.669059] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    2.669180] systemd[1]: Starting system-autologin.slice.
[    2.669455] systemd[1]: Created slice system-autologin.slice.
[    2.669685] systemd[1]: Starting Increase datagram queue length...
[    2.672373] systemd[1]: Starting Restore / save the current clock...
[    2.680232] usb 1-1.3: new low-speed USB device number 4 using dwc_otg
[    2.681177] systemd[1]: Mounted Huge Pages File System.
[    2.681336] systemd[1]: Starting udev Coldplug all Devices...
[    2.684602] systemd[1]: Mounting Debug File System...
[    2.700119] systemd[1]: Started Set Up Additional Binary Formats.
[    2.700635] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    2.703771] systemd[1]: Mounting POSIX Message Queue File System...
[    2.752011] systemd[1]: Starting Load Kernel Modules...
[    2.756663] systemd[1]: Starting Slices.
[    2.756758] systemd[1]: Reached target Slices.
[    2.760703] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    2.779701] systemd[1]: Starting Create Static Device Nodes in /dev...
[    2.792352] usb 1-1.3: New USB device found, idVendor=0d3d, idProduct=0001
[    2.792376] usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.792391] usb 1-1.3: Product: USBPS2
[    2.811393] input: USBPS2 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:0D3D:0001.0001/input/input0
[    2.832334] fuse init (API version 7.23)
[    2.833014] systemd[1]: Started udev Coldplug all Devices.
[    2.854086] systemd[1]: Mounted POSIX Message Queue File System.
[    2.855246] systemd[1]: Mounted Debug File System.
[    2.857341] systemd[1]: Started Increase datagram queue length.
[    2.869217] hid-generic 0003:0D3D:0001.0001: input,hidraw0: USB HID v1.00 Keyboard [USBPS2] on usb-3f980000.usb-1.3/input0
[    2.876095] i2c /dev entries driver
[    2.885657] systemd[1]: Started Load Kernel Modules.
[    2.889863] input: USBPS2 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.1/0003:0D3D:0001.0002/input/input1
[    2.911833] systemd[1]: Started Restore / save the current clock.
[    2.914530] systemd[1]: Time has been changed
[    2.954927] systemd[1]: Started Create Static Device Nodes in /dev.
[    2.958413] hid-generic 0003:0D3D:0001.0002: input,hidraw1: USB HID v1.00 Mouse [USBPS2] on usb-3f980000.usb-1.3/input1
[    3.002423] systemd[1]: Starting udev Kernel Device Manager...
[    3.058846] systemd[1]: Mounting FUSE Control File System...
[    3.062213] systemd[1]: Mounting Configuration File System...
[    3.064963] systemd[1]: Starting Apply Kernel Variables...
[    3.068385] systemd[1]: Starting Syslog Socket.
[    3.068754] systemd[1]: Listening on Syslog Socket.
[    3.068922] systemd[1]: Starting Journal Service...
[    3.072888] systemd[1]: Started Journal Service.
[    3.087926] systemd-udevd[131]: starting version 215
[    3.198053] usb 1-1.5: new low-speed USB device number 5 using dwc_otg
[    3.301059] usb 1-1.5: New USB device found, idVendor=062a, idProduct=0000
[    3.301083] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.305921] input: HID 062a:0000 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:062A:0000.0003/input/input2
[    3.306888] hid-generic 0003:062A:0000.0003: input,hidraw2: USB HID v1.10 Mouse [HID 062a:0000] on usb-3f980000.usb-1.5/input0
[    3.653385] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[    3.675272] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[    3.944371] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    3.951216] usbcore: registered new interface driver brcmfmac
[    4.126761] random: nonblocking pool is initialized
[    4.142662] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: May 27 2016 00:13:38 version 7.45.41.26 (r640327) FWID 01-df77e4a7
[    4.168280] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code
[    4.265508] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code
[    4.265540] cfg80211: World regulatory domain updated:
[    4.265549] cfg80211:  DFS Master region: unset
[    4.265558] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    4.265573] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    4.265586] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    4.265598] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    4.265614] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    4.265628] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    4.265640] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    4.265652] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    4.265665] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    4.617139] systemd-journald[138]: Received request to flush runtime journal from PID 1
[    6.620050] brcmfmac: brcmf_add_if: ERROR: netdev:wlan0 already exists
[    6.620062] brcmfmac: brcmf_add_if: ignore IF event
[    6.624223] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    6.624241] brcmfmac: power management disabled
[    6.695168] uart-pl011 3f201000.uart: no DMA platform data
[    6.958860] Adding 102396k swap on /var/swap.  Priority:-1 extents:4 across:192508k SSFS
[    7.201570] cfg80211: Regulatory domain changed to country: GB
[    7.201591] cfg80211:  DFS Master region: ETSI
[    7.201597] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    7.201605] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    7.201613] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    7.201621] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    7.201627] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[    7.201635] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[    7.529321] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[    7.529469] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.867520] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   11.279304] Bluetooth: Core ver 2.21
[   11.279365] NET: Registered protocol family 31
[   11.279371] Bluetooth: HCI device and connection manager initialized
[   11.279757] Bluetooth: HCI socket layer initialized
[   11.279770] Bluetooth: L2CAP socket layer initialized
[   11.279792] Bluetooth: SCO socket layer initialized
[   11.290730] Bluetooth: HCI UART driver ver 2.3
[   11.290743] Bluetooth: HCI UART protocol H4 registered
[   11.290748] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   11.290848] Bluetooth: HCI UART protocol BCM registered
[   13.797346] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.797359] Bluetooth: BNEP filters: protocol multicast
[   13.797374] Bluetooth: BNEP socket layer initialized
