[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.27-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #917 SMP Tue Oct 25 16:00:29 BST 2016
[    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
[    0.000000] cma: Reserved 8 MiB at 0x3a800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 241664
[    0.000000] free_area_init_node: node 0, pgdat 808c2f80, node_mem_map b9fa6000
[    0.000000]   Normal zone: 2124 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 241664 pages, LIFO batch:31
[    0.000000] [bcm2709_smp_init_cpus] enter (9520->f3003010)
[    0.000000] [bcm2709_smp_init_cpus] ncores=4
[    0.000000] PERCPU: Embedded 13 pages/cpu @b9f62000 s22592 r8192 d22464 u53248
[    0.000000] pcpu-alloc: s22592 r8192 d22464 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 239540
[    0.000000] Kernel command line: 8250.nr_uarts=0 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2709.boardrev=0xa02082 bcm2709.serial=0xa3f5a2db smsc95xx.macaddr=B8:27:EB:F5:A2:DB bcm2708_fb.fbswap=1 bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 939072K/966656K available (6348K kernel code, 432K rwdata, 1716K rodata, 476K init, 764K bss, 19392K reserved, 8192K cma-reserved)
[    0.000000] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xbb800000 - 0xff800000   (1088 MB)
    lowmem  : 0x80000000 - 0xbb000000   ( 944 MB)
    modules : 0x7f000000 - 0x80000000   (  16 MB)
      .text : 0x80008000 - 0x807e8584   (8066 kB)
      .init : 0x807e9000 - 0x80860000   ( 476 kB)
      .data : 0x80860000 - 0x808cc290   ( 433 kB)
       .bss : 0x808cf000 - 0x8098e1ec   ( 765 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000026] Switching to timer-based delay loop, resolution 52ns
[    0.000293] Console: colour dummy device 80x30
[    0.000492] console [tty1] enabled
[    0.000516] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000536] pid_max: default: 32768 minimum: 301
[    0.000852] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000866] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001801] Disabling cpuset control group subsystem
[    0.001834] Initializing cgroup subsys io
[    0.001864] Initializing cgroup subsys memory
[    0.001907] Initializing cgroup subsys devices
[    0.001929] Initializing cgroup subsys freezer
[    0.001949] Initializing cgroup subsys net_cls
[    0.001999] CPU: Testing write buffer coherency: ok
[    0.002066] ftrace: allocating 21225 entries in 63 pages
[    0.050681] CPU0: update cpu_capacity 1024
[    0.050714] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.050726] [bcm2709_smp_prepare_cpus] enter
[    0.050864] Setting up static identity map for 0x8240 - 0x8274
[    0.052503] [bcm2709_boot_secondary] cpu:1 started (0) 18
[    0.052690] [bcm2709_secondary_init] enter cpu:1
[    0.052734] CPU1: update cpu_capacity 1024
[    0.052740] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.053120] [bcm2709_boot_secondary] cpu:2 started (0) 18
[    0.053283] [bcm2709_secondary_init] enter cpu:2
[    0.053304] CPU2: update cpu_capacity 1024
[    0.053310] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.053670] [bcm2709_boot_secondary] cpu:3 started (0) 17
[    0.053800] [bcm2709_secondary_init] enter cpu:3
[    0.053820] CPU3: update cpu_capacity 1024
[    0.053826] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.053886] Brought up 4 CPUs
[    0.053910] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.053918] CPU: All CPU(s) started in HYP mode.
[    0.053926] CPU: Virtualization extensions available.
[    0.054547] devtmpfs: initialized
[    0.065759] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[    0.066081] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.066792] pinctrl core: initialized pinctrl subsystem
[    0.067303] NET: Registered protocol family 16
[    0.072581] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.079953] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.079965] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.080147] Serial: AMBA PL011 UART driver
[    0.080284] uart-pl011 3f201000.uart: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[    0.080444] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.142823] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x1
[    0.143393] SCSI subsystem initialized
[    0.143575] usbcore: registered new interface driver usbfs
[    0.143664] usbcore: registered new interface driver hub
[    0.143764] usbcore: registered new device driver usb
[    0.150232] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-10-25 16:02
[    0.177445] clocksource: Switched to clocksource arch_sys_counter
[    0.222650] FS-Cache: Loaded
[    0.222929] CacheFiles: Loaded
[    0.235184] NET: Registered protocol family 2
[    0.236032] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.236147] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.236336] TCP: Hash tables configured (established 8192 bind 8192)
[    0.236429] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.236476] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.236705] NET: Registered protocol family 1
[    0.237023] RPC: Registered named UNIX socket transport module.
[    0.237033] RPC: Registered udp transport module.
[    0.237042] RPC: Registered tcp transport module.
[    0.237050] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.238254] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[    0.239581] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.252879] VFS: Disk quotas dquot_6.6.0
[    0.253186] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.255391] FS-Cache: Netfs 'nfs' registered for caching
[    0.256293] NFS: Registering the id_resolver key type
[    0.256335] Key type id_resolver registered
[    0.256345] Key type id_legacy registered
[    0.258686] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.258828] io scheduler noop registered
[    0.258850] io scheduler deadline registered (default)
[    0.258905] io scheduler cfq registered
[    0.261410] BCM2708FB: allocated DMA memory fac00000
[    0.261436] BCM2708FB: allocated DMA channel 0 @ f3007000
[    0.311647] Console: switching to colour frame buffer device 228x61
[    1.163793] bcm2835-rng 3f104000.rng: hwrng registered
[    1.163989] vc-cma: Videocore CMA driver
[    1.164002] vc-cma: vc_cma_base      = 0x00000000
[    1.164013] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
[    1.164022] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
[    1.164299] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
[    1.179043] brd: module loaded
[    1.187741] loop: module loaded
[    1.188705] vchiq: vchiq_init_state: slot_zero = 0xbac80000, is_master = 0
[    1.190240] Loading iSCSI transport class v2.0-870.
[    1.190909] usbcore: registered new interface driver smsc95xx
[    1.190964] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.391224] Core Release: 2.80a
[    1.391242] Setting default values for core params
[    1.391278] Finished setting default values for core params
[    1.591646] Using Buffer DMA mode
[    1.591658] Periodic Transfer Interrupt Enhancement - disabled
[    1.591666] Multiprocessor Interrupt Enhancement - disabled
[    1.591676] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.591692] Dedicated Tx FIFOs mode
[    1.592046] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xbac14000 dma = 0xfac14000 len=9024
[    1.592079] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[    1.592102] dwc_otg: Microframe scheduler enabled
[    1.592153] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x8044772c
[    1.592168] WARN::hcd_init_fiq:414: FIQ ASM at 0x80447a9c length 36
[    1.592183] WARN::hcd_init_fiq:439: MPHI regs_base at 0xbbf7a000
[    1.592249] dwc_otg 3f980000.usb: DWC OTG Controller
[    1.592288] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    1.592322] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[    1.592376] Init: Port Power? op_state=1
[    1.592385] Init: Power Port (0)
[    1.592594] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.592610] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.592623] usb usb1: Product: DWC OTG Controller
[    1.592635] usb usb1: Manufacturer: Linux 4.4.27-v7+ dwc_otg_hcd
[    1.592647] usb usb1: SerialNumber: 3f980000.usb
[    1.593465] hub 1-0:1.0: USB hub found
[    1.593507] hub 1-0:1.0: 1 port detected
[    1.594115] dwc_otg: FIQ enabled
[    1.594125] dwc_otg: NAK holdoff enabled
[    1.594133] dwc_otg: FIQ split-transaction FSM enabled
[    1.594176] Module dwc_common_port init
[    1.594429] usbcore: registered new interface driver usb-storage
[    1.594697] mousedev: PS/2 mouse device common for all mice
[    1.595425] bcm2835-cpufreq: min=600000 max=1200000
[    1.595720] sdhci: Secure Digital Host Controller Interface driver
[    1.595729] sdhci: Copyright(c) Pierre Ossman
[    1.596044] sdhost: log_buf @ bac13000 (fac13000)
[    1.647475] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    1.649728] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[    1.649741] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[    1.705820] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.707564] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.707965] ledtrig-cpu: registered to indicate activity on CPUs
[    1.708085] hidraw: raw HID events driver (C) Jiri Kosina
[    1.708276] usbcore: registered new interface driver usbhid
[    1.708285] usbhid: USB HID core driver
[    1.708823] Initializing XFRM netlink socket
[    1.708863] NET: Registered protocol family 17
[    1.709017] Key type dns_resolver registered
[    1.709217] mmc0: new high speed SDHC card at address 0007
[    1.709663] Registering SWP/SWPB emulation handler
[    1.709803] mmcblk0: mmc0:0007 SD08G 7.42 GiB
[    1.710587] registered taskstats version 1
[    1.710790] vc-sm: Videocore shared memory driver
[    1.710806] [vc_sm_connected_init]: start
[    1.711137]  mmcblk0: p1 p2
[    1.711379] [vc_sm_connected_init]: end - returning 0
[    1.712801] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[    1.713207] of_cfs_init
[    1.713292] of_cfs_init: OK
[    1.727629] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    1.727681] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    1.728591] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    1.730165] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.731737] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.734516] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    1.736804] devtmpfs: mounted
[    1.737614] Freeing unused kernel memory: 476K (807e9000 - 80860000)
[    1.787576] Indeed it is in host mode hprt0 = 00021501
[    1.825304] mmc1: new high speed SDIO card at address 0001
[    1.967497] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    1.967653] Indeed it is in host mode hprt0 = 00001101
[    2.024061] random: systemd: uninitialized urandom read (16 bytes read, 24 bits of entropy available)
[    2.029510] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    2.029923] systemd[1]: Detected architecture 'arm'.
[    2.132017] NET: Registered protocol family 10
[    2.133459] systemd[1]: Inserted module 'ipv6'
[    2.135218] systemd[1]: Set hostname to <raspberrypi>.
[    2.167794] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[    2.167816] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.168621] hub 1-1:1.0: USB hub found
[    2.168713] hub 1-1:1.0: 5 ports detected
[    2.292938] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 59 bits of entropy available)
[    2.385429] random: systemd: uninitialized urandom read (16 bytes read, 70 bits of entropy available)
[    2.386733] random: systemd: uninitialized urandom read (16 bytes read, 70 bits of entropy available)
[    2.388455] random: systemd: uninitialized urandom read (16 bytes read, 70 bits of entropy available)
[    2.403037] random: systemd: uninitialized urandom read (16 bytes read, 71 bits of entropy available)
[    2.403780] random: systemd: uninitialized urandom read (16 bytes read, 71 bits of entropy available)
[    2.403949] random: systemd: uninitialized urandom read (16 bytes read, 71 bits of entropy available)
[    2.435608] random: systemd: uninitialized urandom read (16 bytes read, 71 bits of entropy available)
[    2.438218] random: systemd: uninitialized urandom read (16 bytes read, 71 bits of entropy available)
[    2.447496] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    2.544263] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    2.544618] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.544700] systemd[1]: Starting Remote File Systems (Pre).
[    2.544855] systemd[1]: Reached target Remote File Systems (Pre).
[    2.545012] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    2.545475] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.545557] systemd[1]: Starting Encrypted Volumes.
[    2.545628] systemd[1]: Reached target Encrypted Volumes.
[    2.545712] systemd[1]: Starting Swap.
[    2.545780] systemd[1]: Reached target Swap.
[    2.545854] systemd[1]: Expecting device dev-mmcblk0p1.device...
[    2.545925] systemd[1]: Starting Root Slice.
[    2.546066] systemd[1]: Created slice Root Slice.
[    2.546137] systemd[1]: Starting User and Session Slice.
[    2.546373] systemd[1]: Created slice User and Session Slice.
[    2.546447] systemd[1]: Starting Delayed Shutdown Socket.
[    2.546613] systemd[1]: Listening on Delayed Shutdown Socket.
[    2.546683] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    2.546879] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    2.546950] systemd[1]: Starting Journal Socket (/dev/log).
[    2.547130] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.547226] systemd[1]: Starting udev Control Socket.
[    2.547383] systemd[1]: Listening on udev Control Socket.
[    2.547708] systemd[1]: Starting udev Kernel Socket.
[    2.547887] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    2.547904] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.547940] systemd[1]: Listening on udev Kernel Socket.
[    2.548041] systemd[1]: Starting Journal Socket.
[    2.548281] systemd[1]: Listening on Journal Socket.
[    2.548440] systemd[1]: Starting System Slice.
[    2.548699] systemd[1]: Created slice System Slice.
[    2.548825] systemd[1]: Starting File System Check on Root Device...
[    2.551045] smsc95xx v1.0.4
[    2.589203] systemd[1]: Starting system-systemd\x2dfsck.slice.
[    2.590138] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    2.590256] systemd[1]: Starting system-autologin.slice.
[    2.590535] systemd[1]: Created slice system-autologin.slice.
[    2.590745] systemd[1]: Starting Increase datagram queue length...
[    2.593459] systemd[1]: Starting Restore / save the current clock...
[    2.601720] systemd[1]: Mounted Huge Pages File System.
[    2.601885] systemd[1]: Starting udev Coldplug all Devices...
[    2.605267] systemd[1]: Mounting Debug File System...
[    2.613695] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:a2:db
[    2.619634] systemd[1]: Started Set Up Additional Binary Formats.
[    2.620162] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    2.623000] systemd[1]: Mounting POSIX Message Queue File System...
[    2.658174] systemd[1]: Starting Load Kernel Modules...
[    2.661172] systemd[1]: Starting Slices.
[    2.661321] systemd[1]: Reached target Slices.
[    2.689898] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    2.712127] systemd[1]: Starting Create Static Device Nodes in /dev...
[    2.757641] fuse init (API version 7.23)
[    2.772604] systemd[1]: Started udev Coldplug all Devices.
[    2.774634] systemd[1]: Started Increase datagram queue length.
[    2.775727] systemd[1]: Mounted Debug File System.
[    2.776782] systemd[1]: Mounted POSIX Message Queue File System.
[    2.795256] i2c /dev entries driver
[    2.799490] systemd[1]: Started Load Kernel Modules.
[    2.823713] systemd[1]: Started Restore / save the current clock.
[    2.827336] systemd[1]: Time has been changed
[    2.847536] usb 1-1.4: new low-speed USB device number 4 using dwc_otg
[    2.880521] systemd[1]: Started Create Static Device Nodes in /dev.
[    2.921764] systemd[1]: Started File System Check on Root Device.
[    2.922369] systemd[1]: Starting udev Kernel Device Manager...
[    2.963555] usb 1-1.4: New USB device found, idVendor=413c, idProduct=3016
[    2.963579] usb 1-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.963592] usb 1-1.4: Product: Dell Premium USB Optical Mouse
[    2.978332] input: Dell Premium USB Optical Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:413C:3016.0001/input/input0
[    2.978770] systemd[1]: Mounting FUSE Control File System...
[    2.980648] hid-generic 0003:413C:3016.0001: input,hidraw0: USB HID v11.10 Mouse [Dell Premium USB Optical Mouse] on usb-3f980000.usb-1.4/input0
[    2.982164] systemd[1]: Mounting Configuration File System...
[    2.984849] systemd[1]: Starting Apply Kernel Variables...
[    2.988087] systemd[1]: Starting Syslog Socket.
[    2.988362] systemd[1]: Listening on Syslog Socket.
[    2.988500] systemd[1]: Starting Journal Service...
[    2.992411] systemd[1]: Started Journal Service.
[    3.002716] systemd-udevd[131]: starting version 215
[    3.057517] usb 1-1.5: new low-speed USB device number 5 using dwc_otg
[    3.176598] usb 1-1.5: New USB device found, idVendor=04b3, idProduct=3025
[    3.176622] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.176635] usb 1-1.5: Product: USB NetVista Full Width Keyboard
[    3.176647] usb 1-1.5: Manufacturer: CHICONY
[    3.190635] input: CHICONY USB NetVista Full Width Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:04B3:3025.0002/input/input1
[    3.248479] hid-generic 0003:04B3:3025.0002: input,hidraw1: USB HID v1.10 Keyboard [CHICONY USB NetVista Full Width Keyboard] on usb-3f980000.usb-1.5/input0
[    3.804060] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    4.641463] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[    4.644349] bcm2708_i2c 3f804000.i2c: BSC1 Controller at 0x3f804000 (irq 83) (baudrate 100000)
[    4.648727] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[    4.736807] audioinjector-audio soc:sound: ASoC: CPU DAI (null) not registered
[    4.736838] audioinjector-audio soc:sound: snd_soc_register_card failed (-517)
[    4.739266] audioinjector-audio soc:sound: ASoC: CODEC DAI wm8731-hifi not registered
[    4.739300] audioinjector-audio soc:sound: snd_soc_register_card failed (-517)
[    4.829885] wm8731 1-001a: Assuming static MCLK
[    4.836750] audioinjector-audio soc:sound: wm8731-hifi <-> 3f203000.i2s mapping ok
[    4.879214] usbcore: registered new interface driver brcmfmac
[    5.008546] random: nonblocking pool is initialized
[    5.029320] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: May 27 2016 00:13:38 version 7.45.41.26 (r640327) FWID 01-df77e4a7
[    5.050573] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code
[    5.147586] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code
[    5.147615] cfg80211: World regulatory domain updated:
[    5.147624] cfg80211:  DFS Master region: unset
[    5.147633] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    5.147648] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    5.147660] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    5.147673] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    5.147688] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    5.147702] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    5.147715] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    5.147728] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    5.147740] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    5.404773] systemd-journald[135]: Received request to flush runtime journal from PID 1
[    7.354962] brcmfmac: brcmf_add_if: ERROR: netdev:wlan0 already exists
[    7.354977] brcmfmac: brcmf_add_if: ignore IF event
[    7.359478] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    7.359510] brcmfmac: power management disabled
[    7.431996] uart-pl011 3f201000.uart: no DMA platform data
[    7.737756] Adding 102396k swap on /var/swap.  Priority:-1 extents:4 across:192508k SSFS
[    7.852087] cfg80211: Regulatory domain changed to country: GB
[    7.852106] cfg80211:  DFS Master region: ETSI
[    7.852111] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    7.852121] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    7.852129] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    7.852137] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    7.852143] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[    7.852150] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[    8.188797] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[    8.188960] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.647843] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    9.650010] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[   12.043136] Bluetooth: Core ver 2.21
[   12.043258] NET: Registered protocol family 31
[   12.043266] Bluetooth: HCI device and connection manager initialized
[   12.043282] Bluetooth: HCI socket layer initialized
[   12.043294] Bluetooth: L2CAP socket layer initialized
[   12.043317] Bluetooth: SCO socket layer initialized
[   12.050770] Bluetooth: HCI UART driver ver 2.3
[   12.050784] Bluetooth: HCI UART protocol H4 registered
[   12.050789] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   12.050893] Bluetooth: HCI UART protocol BCM registered
[   12.280763] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   12.280774] Bluetooth: BNEP filters: protocol multicast
[   12.280787] Bluetooth: BNEP socket layer initialized
[   18.607533] bcm2835-i2s 3f203000.i2s: I2S SYNC error!
[   18.681296] bcm2835-i2s 3f203000.i2s: I2S SYNC error!
[   18.723057] bcm2835-i2s 3f203000.i2s: I2S SYNC error!
[   18.735708] bcm2835-i2s 3f203000.i2s: I2S SYNC error!
