Search found 14 matches

by MedicationTime
Fri Nov 10, 2017 7:18 pm
Forum: Octo Sound Card for the Pi
Topic: No sound on input 2 and 3
Replies: 9
Views: 3694

Re: No sound on input 2 and 3

Here you go ! Screenshots of the recording of 500Hz sinewave at -6dB sent in every inputs. The numbering of the inputs has been done from left to right with the card's text inverted when looking at the top of the card. Input 2 doesn't show anything and input 3 show a little compared to the other sig...
by MedicationTime
Tue Oct 31, 2017 8:04 pm
Forum: Octo Sound Card for the Pi
Topic: Octo not showing up on booting
Replies: 25
Views: 12047

Re: Octo not showing up on booting

Ok sorry, the card does disappear from time to time from aplay -L list.

Still the sudo modprobe commands fix the issue.
by MedicationTime
Tue Oct 31, 2017 7:59 pm
Forum: Octo Sound Card for the Pi
Topic: Octo not showing up on booting
Replies: 25
Views: 12047

Re: Octo not showing up on booting

I just tested using Raspbian and not Noobs, it doesn't change anything. When doing the sed command it writes "REMOVEvolumealsabt" and not "REMOVEvolumealsa" but changing that doesn't change the result. The list of sudo modprobe commands do work and seems to fix the problem permanently : the card doe...
by MedicationTime
Sun Oct 29, 2017 1:19 am
Forum: Octo Sound Card for the Pi
Topic: Octo not showing up on booting
Replies: 25
Views: 12047

Re: Octo not showing up on booting

sudo modprobe -r snd_soc_audioinjector_octo_soundcard sudo modprobe -r snd_soc_cs42xx8_i2c sudo modprobe -r snd_soc_cs42xx8 sudo modprobe snd_soc_cs42xx8 sudo modprobe snd_soc_cs42xx8_i2c sudo modprobe snd_soc_audioinjector_octo_soundcard Those lines worked for me. I did one reboot after that and t...
by MedicationTime
Sun Oct 29, 2017 1:09 am
Forum: Octo Sound Card for the Pi
Topic: No sound on input 2 and 3
Replies: 9
Views: 3694

Re: No sound on input 2 and 3

I'm not certain about it but to me it should be synchronous as it is meant to modify sound parameters on the fly (i.e "real-time). The other inputs work just fine. I've checked again yesterday and, yes, noise on input 2 and nothing on input 3.
by MedicationTime
Fri Oct 20, 2017 6:18 pm
Forum: Octo Sound Card for the Pi
Topic: Octo not showing up on booting
Replies: 25
Views: 12047

Re: Octo not showing up on booting

Sure ! Mail, facebook, other ?
by MedicationTime
Wed Oct 18, 2017 9:21 pm
Forum: Octo Sound Card for the Pi
Topic: No sound on input 2 and 3
Replies: 9
Views: 3694

Re: No sound on input 2 and 3

When you have the board audio connectors in front of you, I'm counting input 2 and 3 from the right. They correspond to the one just under the "Audioinjector.net / Ocoto Soundcard" text. I don't record audio, I access the audio streams in real-time with Pure Data. I've tried to monitor them "sonical...
by MedicationTime
Thu Oct 12, 2017 11:02 pm
Forum: Octo Sound Card for the Pi
Topic: Octo not showing up on booting
Replies: 25
Views: 12047

Re: Octo not showing up on booting

but now it doesn't, even if I redo it all (Before you setup the octo and low-level setup commands)
Update : sometimes it does wotk when redoing all the steps.
by MedicationTime
Thu Oct 12, 2017 10:58 pm
Forum: Octo Sound Card for the Pi
Topic: Octo not showing up on booting
Replies: 25
Views: 12047

Re: Octo not showing up on booting

I've change d the line type=REMOVEvolumealsabt to type=REMOVEvolumealsa but it doesn't change anything. /boot/config.txt is fine : audioinjector-addons overlay is in use and the dtapram=audio=on is disabled. It worked fine the first time I did the whole procedure, but now it doesn't, even if I redo ...
by MedicationTime
Thu Oct 12, 2017 9:05 pm
Forum: Octo Sound Card for the Pi
Topic: Octo not showing up on booting
Replies: 25
Views: 12047

Re: Octo not showing up on booting

I hadn't checked that file .
It says : type=REMOVEvolumealsabt