How to setup and test

Moderator: flatmax

Posts: 24
Joined: Tue Jun 27, 2017 4:07 pm

Re: How to setup and test

Post by wh7qq » Sat Sep 07, 2019 8:05 am

Has anyone tried to get it running with Raspbian Buster? I am beating my head against it right now and so far, have nothing but confusion.

Posts: 1
Joined: Tue Oct 01, 2019 4:41 pm

Re: How to setup and test

Post by Victorb » Tue Oct 01, 2019 4:54 pm

I have AudioInjector. Setup is done following your instructions step by step.
Raspberry PI3 B+.

The card is discoverable by system.

Keep having this
aplay: pcm_write:2053: write error: Input/output error

audioinjector-stereo soc:sound: ASoC: CODEC DAI wm8731-hifi not registered - will retry
[ 5.222891] audioinjector-stereo soc:sound: snd_soc_register_card failed (-517)
[ 5.460281] wm8731 1-001a: Assuming static MCLK
[ 5.460348] wm8731 1-001a: 1-001a supply AVDD not found, using dummy regulator
[ 5.460501] wm8731 1-001a: Linked as a consumer to regulator.0
[ 5.460518] wm8731 1-001a: 1-001a supply HPVDD not found, using dummy regulator
[ 5.460595] wm8731 1-001a: 1-001a supply DCVDD not found, using dummy regulator
[ 5.460688] wm8731 1-001a: 1-001a supply DBVDD not found, using dummy regulator
[ 5.474617] audioinjector-stereo soc:sound: wm8731-hifi <-> 3f203000.i2s mapping ok
[ 438.915976] bcm2835-i2s 3f203000.i2s: I2S SYNC error!

i2c_arm and i2s interfaces are on

Linux raspberrypi 4.19.75-v7+ #1270 SMP Tue Sep 24 18:45:11 BST 2019 armv7l GNU/Linux

Any suggestions where is the mistake on my side?

Thank you in advance,

Post Reply

Who is online

Users browsing this forum: No registered users and 11 guests