What should our next kickstarter be ?

Moderator: flatmax

What do you think we should target next ?

2 channel amplifier sound card/board
3
9%
8 channel amplifier sound card/board
2
6%
Optical digital multichannel sound card
4
11%
Optical digital stereo (SPDIF) sound card
4
11%
16 channel output, 12 channel input card sound card
13
37%
12V battery protector with USB power out and (solar or wall) trickle charger
4
11%
Take the Octo sound card up to 192 kHz sample rates
5
14%
 
Total votes: 35

flatmax
Posts: 602
Joined: Sat Jul 23, 2016 11:39 pm

What should our next kickstarter be ?

Post by flatmax » Sun Jul 30, 2017 12:19 am

Let us know your thoughts ... if the poll doesn't contain what you are after, please reply to this thread.
Checkout the next kickstarter campaign - the Ultra 2 : https://kck.st/2xwM3DL
Please review the Zero sound card on Amazon USA : https://www.amazon.com/dp/B075V1VNDD
---
Check out our new forum on github : https://github.com/Audio-Injector

IrwinAllen13
Posts: 13
Joined: Sun Jul 30, 2017 5:05 am

Re: What should our next kickstarter be ?

Post by IrwinAllen13 » Sun Jul 30, 2017 5:13 am

May I suggest a 6 channel input/output device that supports sync encoding across all 6 channels for 5.1 surround sound.

It would also be nice to be able to daisy chain multiple audio injectors.

flatmax
Posts: 602
Joined: Sat Jul 23, 2016 11:39 pm

Re: What should our next kickstarter be ?

Post by flatmax » Mon Jul 31, 2017 12:16 am

OK - do you mean some way to entrain master clocks - and synchronise the start of play/rec ?

Matt
Checkout the next kickstarter campaign - the Ultra 2 : https://kck.st/2xwM3DL
Please review the Zero sound card on Amazon USA : https://www.amazon.com/dp/B075V1VNDD
---
Check out our new forum on github : https://github.com/Audio-Injector

IrwinAllen13
Posts: 13
Joined: Sun Jul 30, 2017 5:05 am

Re: What should our next kickstarter be ?

Post by IrwinAllen13 » Mon Jul 31, 2017 2:53 am

Hey Matt,

Thanks for the answering back about this.

I am not 100% as I am new to Sound Hardware Interfaces.

My overall goal is to capture a 5.1 Surround sound audio feed to stream over the web. Hopefully via OPUS.

Currently, I have tested this with the Stereo Injector, and everything works just fine. However, it can't capture multiple (2>) channels.
I have also tested this with the Octave, and I run into a problem where the stereo encoders are not in sync, and I have to create 3 separate stereo files which I have to sync post production.

It would be nice to simply plug in my 6 feeds and select an algorithm to record, and then stream.

Hopefully, that answers your question.

IrwinAllen13
Posts: 13
Joined: Sun Jul 30, 2017 5:05 am

Re: What should our next kickstarter be ?

Post by IrwinAllen13 » Mon Jul 31, 2017 3:00 am

As I am thinking about all of this. The 8-channel Audio Injector up to 192 KHz sampling would be nice. Curious, what would be your plans on the audio response bandwidth?

Edward
Posts: 3
Joined: Mon Jul 31, 2017 3:13 pm

Re: What should our next kickstarter be ?

Post by Edward » Mon Jul 31, 2017 3:25 pm

My pick would be an upgrade of the Zero Soundcard to 4-channel input.

flatmax
Posts: 602
Joined: Sat Jul 23, 2016 11:39 pm

Re: What should our next kickstarter be ?

Post by flatmax » Tue Aug 01, 2017 9:28 am

IrwinAllen13 wrote:
Mon Jul 31, 2017 2:53 am
Hey Matt,

Thanks for the answering back about this.

I am not 100% as I am new to Sound Hardware Interfaces.

My overall goal is to capture a 5.1 Surround sound audio feed to stream over the web. Hopefully via OPUS.

Currently, I have tested this with the Stereo Injector, and everything works just fine. However, it can't capture multiple (2>) channels.
I have also tested this with the Octave, and I run into a problem where the stereo encoders are not in sync, and I have to create 3 separate stereo files which I have to sync post production.

It would be nice to simply plug in my 6 feeds and select an algorithm to record, and then stream.

Hopefully, that answers your question.
The Octo which is currently available could be what you are after ?
Checkout the next kickstarter campaign - the Ultra 2 : https://kck.st/2xwM3DL
Please review the Zero sound card on Amazon USA : https://www.amazon.com/dp/B075V1VNDD
---
Check out our new forum on github : https://github.com/Audio-Injector

flatmax
Posts: 602
Joined: Sat Jul 23, 2016 11:39 pm

Re: What should our next kickstarter be ?

Post by flatmax » Tue Aug 01, 2017 9:29 am

IrwinAllen13 wrote:
Mon Jul 31, 2017 3:00 am
As I am thinking about all of this. The 8-channel Audio Injector up to 192 KHz sampling would be nice. Curious, what would be your plans on the audio response bandwidth?
Not sure ! What do you suggest ?
Checkout the next kickstarter campaign - the Ultra 2 : https://kck.st/2xwM3DL
Please review the Zero sound card on Amazon USA : https://www.amazon.com/dp/B075V1VNDD
---
Check out our new forum on github : https://github.com/Audio-Injector

flatmax
Posts: 602
Joined: Sat Jul 23, 2016 11:39 pm

Re: What should our next kickstarter be ?

Post by flatmax » Tue Aug 01, 2017 9:29 am

Edward wrote:
Mon Jul 31, 2017 3:25 pm
My pick would be an upgrade of the Zero Soundcard to 4-channel input.
A small format multichannel card ?
Would you accept 8 out, 6 in ?

Matt
Checkout the next kickstarter campaign - the Ultra 2 : https://kck.st/2xwM3DL
Please review the Zero sound card on Amazon USA : https://www.amazon.com/dp/B075V1VNDD
---
Check out our new forum on github : https://github.com/Audio-Injector

Edward
Posts: 3
Joined: Mon Jul 31, 2017 3:13 pm

Re: What should our next kickstarter be ?

Post by Edward » Tue Aug 01, 2017 10:54 am

flatmax wrote:
Tue Aug 01, 2017 9:29 am
A small format multichannel card ?
Would you accept 8 out, 6 in ?
A small format, inexpensive, multichannel card :)
I'm not sure what your retail price on the Zero will be, but based on the Kickstarter rewards I'm guessing it will be a fair bit less than the Octo. I'll probably pre-order a Zero as soon as they're available and make do with two channels, but ideally I'd like an extra two inputs if it could be done without vastly increasing the price. 8 out, 6 in would be fine, for the right price!

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests