Page 3 of 3

Re: What should our next kickstarter be ?

Posted: Sat Sep 30, 2017 2:24 am
by NGB
I forgot, i saw adat in/out and adat interface mentioned by others, i'll 2nd (or 3rd?) that.

Lots of people have multichannel preamps that output adat. Normally i take audio via xlr to one of the input channels and output to a recording device that takes audio via adat/lightpipe. I use three of them, our recorder has three adat ins (so 24 channel recording).

One option for me is to use one of these multichannel preamps when i only need 8 channels and not drag all of the equipment out. But devices that will take adat as input and output on a cable that a computer can use are really expensive! So, having something on the Rpi that can take adat as input and either record the channels, or output the data on something a laptop can use (firewire?) would be invaluable to anyone who has these multichannel preamps. There ARE no inexpensive devices that do any of that..

Re: What should our next kickstarter be ?

Posted: Tue Oct 03, 2017 2:33 pm
by Jonathansantana
Maybe a soundcard for a car stereo project ? it would be nice to have a multipurpose pi3 on the car with good sound quality

Re: What should our next kickstarter be ?

Posted: Tue Nov 07, 2017 12:26 pm
by jessecobra
16 channel output, 12 channel input card sound card of course!

Re: What should our next kickstarter be ?

Posted: Tue Dec 19, 2017 6:39 am
by gpeacock
Balanced I/O for the Stereo Soundcard. Could use plugs on the board and a choice of XLR or 1/4" dongles.

Re: What should our next kickstarter be ?

Posted: Tue Dec 19, 2017 4:49 pm
by mikehall
Jonathansantana wrote:
Tue Oct 03, 2017 2:33 pm
Maybe a soundcard for a car stereo project ? it would be nice to have a multipurpose pi3 on the car with good sound quality
I will go with this.

Re: What should our next kickstarter be ?

Posted: Sun Jan 21, 2018 2:30 am
by benDan
Board to take input from speaker wires (TV for example) and output switched between wired speakers and Bluetooth headset/speakers controlled by a TV remote set to an unused button.

Re: What should our next kickstarter be ?

Posted: Sun Jan 28, 2018 9:02 pm
by AndyTij
Someone else suggested it, and I second it, a card with Stereo Balanced XLR or 1/4" TRS jack inputs as well as outputs would have many applications.

Maybe also a soundcard with AES audio in and out.

Thanks
Andy

Re: What should our next kickstarter be ?

Posted: Sun Jan 28, 2018 10:36 pm
by AndyTij
Also, a composite video input card so you can record video in similar ways to the Pi Camera

Re: What should our next kickstarter be ?

Posted: Tue Apr 03, 2018 9:19 pm
by keshymarkyz
Its all about sucks lol those kickstarter can manage these easily