IN and OUT

Moderator: flatmax

Post Reply
PGoldie
Posts: 3
Joined: Mon Mar 26, 2018 11:47 am

IN and OUT

Post by PGoldie » Tue May 01, 2018 12:57 pm

I am using the AudioInjector for streaming radio. The sound card installed and worked great from the start, i.e. before I set up the stream using Darkice client to stream to an Icecast server. The stream out to the server works fine when I send audio into the IN puts from the mixer, and I can monitor via the OUT puts. The problem is I cannot play anything on the RPi and have it stream out via Darkice. I have tried aplay, VLC, Audacity... although the audio is great monitored through the OUT put, it is not captured by the Darkice client to go out the stream.

I hope you can point me on how to get audio generated by the RPi to get out... even though I suspect you will say it is a client issue.

alejandro
Posts: 5
Joined: Sun Feb 18, 2018 7:28 am

Re: IN and OUT

Post by alejandro » Fri May 04, 2018 12:04 pm

Hi can share your configuration? don't has Buffer underun?

Related to listen locally need to send to loopback interface and capture from them, this way you will can read from 2 diferent programs the same ouput...

flatmax
Posts: 602
Joined: Sat Jul 23, 2016 11:39 pm

Re: IN and OUT

Post by flatmax » Tue May 08, 2018 7:58 pm

Is the problem in having two applications open the pcm device at the same time ?

Another way to do it is to use the plug:dmix device. dmix will mix many audio streams into the one output over PCM.

Matt
Checkout the next kickstarter campaign - the Ultra 2 : https://kck.st/2xwM3DL
Please review the Zero sound card on Amazon USA : https://www.amazon.com/dp/B075V1VNDD
---
Check out our new forum on github : https://github.com/Audio-Injector

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests