Project box for Octo card and the rca inputs?

Moderator: flatmax

Post Reply
tilimil
Posts: 9
Joined: Mon Nov 06, 2017 4:31 am

Project box for Octo card and the rca inputs?

Post by tilimil » Wed Nov 22, 2017 1:15 am

Has anyone built an enclosure for the RPI and the octo inputs/outputs? Would love it if there was something ready made. Or if someone already has a good solution, pics and details would be much appreciated!

Thanks.

flatmax
Posts: 609
Joined: Sat Jul 23, 2016 11:39 pm

Re: Project box for Octo card and the rca inputs?

Post by flatmax » Fri Nov 24, 2017 8:24 am

I am keen for an enclosure as well !
Check out our audiophile quality crossovers : https://bit.ly/2kb1nzZ
Please review the Zero sound card on Amazon USA : https://www.amazon.com/dp/B075V1VNDD
---
Check out our new forum on github : https://github.com/Audio-Injector

robiwan
Posts: 59
Joined: Wed Jul 05, 2017 1:18 am

Re: Project box for Octo card and the rca inputs?

Post by robiwan » Sun Nov 26, 2017 7:14 am

I'm planning on using frontpanelexpress.com to make a box exposing the Ethernet + USB + HDMI connector (via extension cable) and the RCA connectors of course (+ routing WiFi antenna outside the box).

tilimil
Posts: 9
Joined: Mon Nov 06, 2017 4:31 am

Re: Project box for Octo card and the rca inputs?

Post by tilimil » Sun Dec 03, 2017 4:18 am

Any thoughts on the best way to mount these RCA input to a panel?

robiwan
Posts: 59
Joined: Wed Jul 05, 2017 1:18 am

Re: Project box for Octo card and the rca inputs?

Post by robiwan » Sun Dec 03, 2017 4:59 am

Cutouts for the RCAs and mounting screws ?

tilimil
Posts: 9
Joined: Mon Nov 06, 2017 4:31 am

Re: Project box for Octo card and the rca inputs?

Post by tilimil » Sun Dec 03, 2017 5:17 am

I don't see any way to mount this thing with screws. But Ive never done anything like this so maybe I'm missing something obvious. Appreciate any pointers you can give.

robiwan
Posts: 59
Joined: Wed Jul 05, 2017 1:18 am

Re: Project box for Octo card and the rca inputs?

Post by robiwan » Sun Dec 03, 2017 6:00 am

The holes in between the RCAs have a plastic back end, so screws that cut into plastic will work. On the input there are two holes, on the output there are three. Do you see what I mean ?

tilimil
Posts: 9
Joined: Mon Nov 06, 2017 4:31 am

Re: Project box for Octo card and the rca inputs?

Post by tilimil » Thu Dec 07, 2017 2:14 pm

Yep, worked great. Thanks!

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests