Extra Breakout boards / parts for Zero?

Moderator: flatmax

Post Reply
cbrunschen
Posts: 1
Joined: Tue Sep 05, 2017 5:25 am

Extra Breakout boards / parts for Zero?

Post by cbrunschen » Thu Oct 12, 2017 10:37 pm

Hi,

Say I want to have a few different options for connectors; the breakout boards make it easy to swap between them - but only if I have multiple breakout boards, each with a different connector soldered into place (which, by the way, is great that you made that possible!) Can I buy some spare breakout boards from you somehow?

Also, the connectors for the 3-wire cable between the AudioInjector Zero and the breakout boards can be put in two different positions, to support either a direct connection or a connection via a potentiometer; but the kit only includes one connector for each breakout board, so could you tell me what precisely the connector is so I can buy extra ones? In general, if you could share specific part numbers for the connectors you know will fit on the breakout boards, that would be great!

Best wishes,

// Christian

flatmax
Posts: 609
Joined: Sat Jul 23, 2016 11:39 pm

Re: Extra Breakout boards / parts for Zero?

Post by flatmax » Thu Oct 19, 2017 8:37 pm

Hi Christian,

If I am not mistaken, one of these from digikey should work ... you can probably find them elsewhere as they are pretty common.

The connectors are "XH" type. 2.54 mm 3 pin.

Regarding breakout boards, I could put the kicad project for the breakouts up on github ... would you be able to manufacture some boards for yourself ? Otherwise we could try to work something out.

Matt
Check out our audiophile quality crossovers : https://bit.ly/2kb1nzZ
Please review the Zero sound card on Amazon USA : https://www.amazon.com/dp/B075V1VNDD
---
Check out our new forum on github : https://github.com/Audio-Injector

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests